Why so many sliding door installs fail within a year or two, explained by JDM elite technician Yuval.
A lot of doors are installed low quality, usually because the measurements were wrong from the start.
The difference between an install that lasts and one that binds in a year is precise measurement and leaving the door the right clearance.
Usually the house settled and the top of the frame dropped onto the door, leaving it no room to move. That is a sign the door was installed without allowing for natural settling. We correct the clearance and set it up so it keeps working as the house moves.
It comes down to precise measurement and allowing for the house to settle over time. Installs that skip that bind up within a year or two as the frame drops onto the door. Sliding doors are what we do every day, so we set them up to keep gliding for the long run.
From Gal Cohen, Field Area Manager: "I've spent 20+ years on sliding door installation jobs, and our crews now run them across Florida, New York, Georgia and Colorado. Most repairs we handle wrap up in roughly 2 hours, same-day, and you can see the real before-and-afters in the photos and videos on this page."
JDM installs new sliding doors for homes, condos, and commercial buildings, set level, sealed, and locking smoothly from day one. A door put in wrong sticks, leaks air and water, won't lock securely, and wears out fast, so we treat the install as a precision job, not a quick set-and-go.
We measure the opening exactly, then confirm the rough frame is level and square and make structural corrections if it isn't. We remove any existing door and prep the opening with flashing and waterproofing membrane to keep moisture out. The track goes in level, then the panels, adjusted for smooth gliding and a tight seal.
We're authorized installers for Andersen, Pella, and other premium brands, which gives you top door systems plus full manufacturer warranty coverage. New construction, a slider added to a solid wall, or a hinged-to-slider upgrade: we build to local code and hand over a door that looks sharp and runs smoothly for years.
★★★★★ Verified Google Reviews ★★★★★ · a month ago"After I made an appointment I decided I was going to try and do it myself. Michael FaceTimed me, walked me through what to do, then call back if I still needed him. An hour later I called him and he was at my house in 35 minutes. Some of the best service I've ever received from a contractor. He finished in two hours and went above and beyond. The same-day service was incredible. Absolute professionals."
★★★★★ · a year ago"After a couple of hiccups with getting our repair done by someone else, our technician Richard showed up on time (actually half an hour earlier than the appointment time). He was very polite and got the job done in the time he told us it would take. Our glass door now glides smoothly and is able to lock again. I highly recommend Richard, he represented his company very well. I will definitely consider using them in the future!"
★★★★★ · 9 months ago"David, thank you so much for taking the time to explain everything to us. He was so patient, and I appreciate him doing a clean and awesome job. He was respectful of my home and cleaned up after the work was complete. Now my door slides like new, quiet, and smooth. Again, thank you David."
Visit our Google Business Profile for reviews, hours, and directions.
We measure the rough opening and check it against the door's specs, noting header height, sill level, and jamb plumb. Getting these numbers right up front is what makes the door fit clean later.
We use laser levels and squares to confirm the opening is level and plumb, and we correct the framing first if it is not. A door set in a crooked opening binds and leaks no matter how good the unit is.
We take out the old door and hardware, then prep the opening with flashing tape, waterproofing membrane, and a level sill pan. That gives the new door a weathertight base to sit on.
We set and level the track, hang the panels, adjust the rollers for smooth travel, fit the locks and handles, then seal, test, and inspect the whole assembly before we call it done.
Call (954) 689-2155 or request an estimate online. We confirm flat-rate pricing upfront, with no hidden fees.
Our licensed tech arrives with common parts on the truck. Most door installation jobs are completed in a single visit.
We test the repair, walk you through the work, and make sure everything is running smoothly before we leave.
Door binding after a few years? Ask us about a settling-proof re-fit.
As a house settles, the frame drops onto the door and chokes it. We re-set the clearance so the frame stops pressing and the door glides again.
We frame the rough opening to spec, set the door plumb and level, and tie in flashing and housewrap before the stucco or siding goes on. Sequencing it this way keeps water out of the wall for good.
We cut a new opening into an existing exterior wall, size the structural header to span it, apply waterproofing membrane, and set the slider. This work needs a permit and inspection.
Coastal zones require a Miami-Dade NOA or FL Product Approval rating. We source from PGT, CGI, and ESW, install to the manufacturer's spec, and close out the permit for you.
Large-opening multi-panel systems in 3-, 4-, and 6-panel layouts. These need precise header sizing and careful carriage alignment so every panel tracks together.
We convert a hinged patio door to a slider to free up floor space and bring in more light. The job includes frame modification, a new sill, and fresh interior trim.
We are a door supplier as well as an installer, so we source the slider that fits your opening and budget, from standard aluminum to premium impact and multi-panel systems, then install it.
⏱ Same-day service available based on capacity. Call to confirm dispatch.
Our certified installers follow manufacturer-specified procedures on every job, which keeps your warranty valid and your door performing as designed. Professional install avoids the costly problems that come from DIY or handyman attempts.
We use laser-level tools and careful measurement to confirm every opening is sized and squared before install begins. That precision removes the gaps, binding, and uneven operation that plague badly measured jobs.
Every installation meets or beats local building codes for structural integrity, energy efficiency, and impact resistance where required. We handle permit applications and coordinate inspections so your project passes clean.
As authorized installers for Andersen, Pella, and other top manufacturers, we offer access to the industry's finest door systems at competitive prices. Our brand partnerships also mean dedicated support and full manufacturer warranty protection for your investment.
Proper flashing and sealing around a sliding door opening is critical to preventing water damage. Our installers use proven waterproofing techniques and premium sealants to create a watertight barrier that protects your home's structure.
We respect your home by protecting floors and furniture during installation, keeping the work area organized, and performing a thorough cleanup when the job is complete. Most installations are finished in a single day with minimal disruption.
We install sliding doors in five states and 20+ metros. Permits, flashing, and code compliance handled by your local team.
Tell us what's going on and we'll follow up with a flat-rate quote. Prefer to talk? Call (954) 689-2155.
Ready to fix or upgrade your sliding doors? Contact us today for a free, no-obligation estimate. Our team is available for same-day service.
Call Us(954) 689-2155 Emailoffice@slidingdoorrepairft.comFree estimate. Same-day service available. Flat-rate pricing. No hidden fees.
Here are straight answers to the questions we hear most about sliding door installation.
Most standard installations are completed in a single day, typically within four to eight hours depending on the door size and configuration. Projects requiring structural modifications to the opening may extend to two days. We provide a clear timeline during your consultation so you know exactly what to expect.
Yes, we regularly install sliding doors in walls where no opening currently exists. This involves cutting the opening, installing proper structural headers and framing, adding flashing and waterproofing, and then installing the door system. We coordinate with structural engineers when needed and handle all permit requirements.
We offer a full range of energy-efficient features including Low-E coated glass, double and triple glazing with argon gas fills, thermally broken aluminum and fiberglass frames, and multi-point weather sealing systems. These features cut heat transfer and lower your monthly energy costs.
In most jurisdictions, replacing an existing door with a similar-sized unit does not require a permit, but changing the size of an opening or creating a new one typically does. We are familiar with local building codes and handle all necessary permit applications and inspections on your behalf.
We are authorized installers for Andersen, Pella, and several other premium manufacturers. We also install doors from a wide range of quality brands to fit every budget. During your consultation, we will recommend the best options based on your priorities for performance, aesthetics, and price.
